A special polymeric static dissipative treatment and cleaner designed to dissipate high static potential quickly as well as preventing their build up. The high molecular weight of ECP 539 helps to provide effective and long lasting treatment for any surface and most materials.
A light spray of ECP 539 will make most surfaces static dissipative thus providing static safe areas for a wide variety of uses.
ECP 539 is non-sluffing, non-corrosive and amine free treatment which will not cause materials such as papers, card and many different types of product to shrivel, fade or turn yellow. For the very best results it is advised that the item should be sprayed on both sides.
ECP 539 can be used on cardboard storage or shipping boxes, paper, carpets, furniture, draperies, foam, packaging, clothing, many fabrics, smocks etc - anywhere static causes a problem.
Directions
Spray ECP 539 directly onto the surface of the material holding the container approximately 200mm to 250mm from the article. Spray with a quick sweeping motion. It is not necessary nor is it recommended to saturate the surface. A light spray in most cases will eliminate charge. Some materials may appear to darken but will return to their original colour upon drying.
Drying time will depend upon the material and quantity of ECP 539 sprayed, but if the general guidelines have been followed then this should be no more than 3 to 4 minutes. The ambient temperatures will also affect this timing also.
Availability
100ml Pump Action Spray Bottle (ECP 589)
250ml Pump Action Spray Bottle (ECP 589/250)
Bulk per litre (ECP 539)
The information above is supplied in good faith and believed to be correct. This information is supplied upon the condition that persons receiving this will make their own determination as to its suitability for their purposes prior to use. TBA Protective Solutions makes no representations or warranties, wither expressed or implied with respect to the information or the product to which the information refers.